Warmtech Moderno ODHMONBLK, Руководство пользователя

Страница: 4 / 8

Installation Instructions
• Before drilling ensure that there are no wires or water pipes in the area where the
heater is to be installed.
• The heater must be installed on the mounting brackets provided.
•
Fasten the brackets securely to the mounting surface and the backside of the heater
using the nuts and screws supplied.
• Fasten the heater securely on the brackets using the nuts and bolts supplied.
• The brackets can be used to adjust the direction of the heater. Adjust the heater angle by
loosening the two bolts on the wall mounting bracket. Tighten the bolts again when the
desired angle is reached.
•
For installation, a disconnecting/isolation switch incorporated in the fixed wiring (in
accordance with the wiring rules) is to be provided.
WARNING! This heater is not equipped with a device to control the room temperature. Do not
use this heater in small rooms when they are occupied by persons not capable of leaving the
room on their own, unless constant supervision is provided.
FIRE RISK EXISTS IF THE HEATER IS COVERED BY OR POSITIONED CLOSE TO CURTAINS OR OTHER
COMBUSTIBLE MATERIALS.
The product requires an L bracket to
separate the product from the mounting
plate
1. Products cannot be tightly installed
The product power cord can be installed
downwards
2 . The p roduct power cord cannot be mounted
horizontally