Warmtec OP-50, Руководство пользователя

Страница: 36 / 48

User Tips:
36
1. The humidity sensor may become dirty or damaged if the device is used in rooms that are
heavily dusty or filled with corrosive gas.
4. Dirty filter affects dehumidification performance and may cause malfunction of the device.
The filter should be cleaned regularly, at least once a month.
2. For safety reasons, do not use the device in rooms filled with combustible/explosive gas,
dust, chemical or biological substances.
8. During dehumidification, due to the heat generated by the running compressor, the
temperature indoors will rise 1°~3°C. This is normal.
3. Damages caused by improper use of the device or using it in incorrect conditions are not
subject to warranty repair.
7. The difference between the humidity indicated on the display and the actual humidity is a
normal phenomenon, the indications are affected by location, environmental conditions
and temperature in the dehumidified room.
5. To avoid flooding and excessive moisture build-up in the device, the water tank should be
emptied regularly.
9. Since the dehumidification effect is related to the ambient temperature and humidity, the
higher the ambient temperature and humidity, the more effective the dehumidification mode,
and the lower the temperature and humidity, the weaker the dehumidification effect.
6. To increase the efficiency of the device, close the doors and windows in the room.
If the air in the room to be dried is very dusty, the filter should be cleaned more often,
depending on how dirty it is.
4. It is normal for warm air to come out of the unit's outlet.
3. When starting and stopping, the unit emits a sound due to the operation of the
compressor. This is normal and should not be considered a malfunction.
TIPS