Warmtec OP-50, Руководство пользователя

Страница: 33 / 48

B. Time programming of device shutdown:
Turn on the device if it is turned off, then press the "Timer" button on the control panel. The
start of programming is signaled by flashing "00". Using the buttons "
▲ " or " ▼ " set the time
for which you want the device to turn off. Constantly holding the button for 2 seconds allows
you to change parameters faster. If during programming, no action is taken on the panel for 10
seconds, the device will remember the last value entered, which will be indicated by a flashing
"00" (range from 00 to 24h, default 00).
5. Setting advanced parameters
1) Humidity correction setting - to set the desired room humidity value, press and hold the
"Timer" button for more than 10 seconds. The display will show the current relative humidity
(RH) in the room. Use the buttons to set the desired value "
▲
" or "
▼
". The humidity level can
be set from 10 RH to 95 RH, adjustable in 1% RH increments.
2) Set the protection against pressure increase in the system - press and hold the "Timer"
button for more than 10 seconds. The display will show the current relative humidity (RH) in
the room. Press the "Timer" button again, "PRES" (Pressure Holding) will flash on the display.
This is information about the activation or deactivation of the protection (ON / OFF). Use the
"+" and "-" buttons to enable or disable the protection.
33