Set the thermostat knob to turns on anti-freeze mode. In this mode, the room
temperature is maintained at approximately 8°C.
OPERATION
Do not turn off the device by removing the plug from the power socket.
!
Star ng the device
Temperature regulation
Set the power control knob to position 0, then wait a few seconds and unplug the power
cord from the socket.
Disconnecting the heater from the power supply
Connect the plug to the power socket, the device will be in standby mode. Using the power
control knob, you can set the selected hea ng power (1000 W, 2000 W, 2000 W TURBO) or
turn the device off (0). The EWH-2000W heater has an addi onal fan (2000 W Turbo mode),
which is designed to increase air circula on and thus ensure faster distribu on of warm air
in the room.
If you are not using the heater, turn the power control knob to position 0.
The thermostat is responsible for regulating the temperature. Turning the thermostat knob
clockwise increases the temperature, turning it counterclockwise lowers it.
Power adjustment knob
Thermostat knob
turbo
0
2000 W
1000 W
2000 W TURBO
(with air supply)
turn off
anti-freeze mode
26
User manual - convector heater
