Warmtec EGW-1000, Руководство пользователя

Страница: 30 / 60

In this mode, you can program the heater to work at selected times in one of three
programs: comfort, economy or frost-free.
NOTE: Before using this mode, you need to set the device time, corresponding to the current
day and time. This should be done in programmable mode by pressing the key .The first
digit will flash on the device display. By setting it with the up/down buttons, we define the day
of the week. If the day we set heater is Tuesday, then we select 2, if Wednesday is 3, etc. Please
confirm the Assigning of the current day to the digit on the display with the key . Then the
second and third digits will flash meaning the hour. Use the up and down buttons to set the
current time. We confirm the choice with the key . We set the minutes in the same way.
3. Now use the up/down keys and the 24-hour scale to set the desired operating time for the
selected mode as a reference. If you want to change the program in the following hours press
the OK button.
4. After setting all hours for the day, press OK and wait 10 seconds to save the settings.
5. Follow the steps above to program the remaining days of the week.
1. If we have already set the day of the week and the time in the heater, we can start
programming the device according to your preferences. Make sure that the programmable
mode is turned on. Then press the key twice .The first digit will start flashing on the display.
This will be the day of the week to be programmed. Using the keys up or down, you can adjust it
from 1-7. Each number corresponds to a particular day of the week. If we previously set our
heater according to the scheme 1-Monday, 2- Tuesday, etc., we program it similarly. Press the
key to confirm the set day of the week.
3. Programmable mode
2. On the timeline, the first two squares will flash above the set hours. By pressing the button
OK you can change the program you want to run at the given time. With the change flashing
squares change.
1. To put the device into standby mode and activate the parental lock function, just hold
down the key.
2. Use the up/down keys to select the desired temperature.
1. To set the temperature, press the key. The temperature starts flashing on display.
If no button is pressed for one minute, the heater in normal operation mode will be
automatically locked.
3. Press again to confirm.
2. To unlock, press the key for 3 seconds. The heater will be unlocked but it will remain
in standby mode. To run it, press .
4. Temperature setting
5. Child lock
30