Warmtec EGW-1000, Руководство пользователя

Страница: 28 / 60

OPERATION OF THE DEVICE
Press the ON/OFF button to exit the standby mode, the LCD will show the current one ambient
temperature and timer time (default 00:00). To re-enter standby mode press the ON/OFF
button. In standby mode, the backlight of the display dims slightly and the the display shows
the current room temperature.
1. Turning the heater on/off
28
2. Wybór trybu pracy
Press the key and use the up / down keys to select the desired mode. Selected icon mode
will flash on the heater display. To confirm your selection, press the "OK." key.
The device can operate in two modes:
• Manual
The manual mode is based on three programs: comfort, economy, frost-free. Switching
between programs takes place within the manual mode using the up/down keys.
• Programmable
Economy
program:
It saves energy. This temperature is always there 3 °C lower
than that set in the comfort program. Useful in a situation of
lower needs to higher room temperature. Timeline in this
program will be displayed in a following way:
Frost-free
program:
Aims to maintain a minimum temperature (8°C) indoors
(this temperature cannot be adjusted). It is set as default for
manual mode, activates automatically when you enter this
mode. Stops heating when the room temperature reaches 8
°C. Timeline will be displayed in the following way:
Comfort
program:
It heats the room according to the set temperature. Press
the „up” or „down” key to select this program until the
icon appears on the display and the following
timeline will be displayed: