Warmlite WL39001, Руководство по безопасности и инструкция

Страница: 6 / 16

6 CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6056
• ALWAYS observe a distance
of at least 50cm between
the back of the heater and
the wall, 50 cm between
either side of the heater
and the wall, and at least 1
metre in front of the heater
in all directions. If necessary,
use the diagram below for
reference when placing or
installing your heater.
• When lighting your heater for
the first time or after a period
of time has passed since
the last use, light the heater
outside, in dry weather and
burn briefly outdoors for 15
minutes.
NOTE: DO NOT OPERATE
UNDER GENERAL USE
OUTDOOR.
• DO NOT leave on overnight.
• DO NOT attempt to dismantle
or repair any part of the
heater. This should only be
done by a qualified service
agent.
• Your heater should be
checked annually by a
qualified person for safe
operation and to detect
any faults. If any faults are
detected, stop using the
heater IMMEDIATELY and
contact the manufacturer or
our Customer Support Team.
• WARNING! Ensure the
isolating valve is accessible
at all times when using the
heater.
• Turn off the gas container
valve after use.
• ALWAYS change the LPG
cylinder in a well ventilated
area, and away from any
source of ignition such as lit
candles, cigarettes, etc.
• ALWAYS change the gas
containers in accordance with
the instructions provided.
• DO NOT move the appliance
when in operation or when
cooling.
• Avoid twisting the gas hose
as this may cause the hose to
stress and fracture.
• Turn off the regulator and
disconnect the regulator from
the cylinder.
• Turn the heater to the off
position before removing and
replacing the cylinder