Industries 1994 LTD
PO Box 58652 Greenmount, Auckland
WWW.Warmington.co.nz
S:\data\Word\spec. sheets\eclipse-crystal eclipse\Free Standing Eclipse 11-07-06.doc
Created on 10/07/2006 10:09 a.m. Page 15 of 15
All dimensions are in millimetres mm
All dimensions are minimums
Ensure That You Have The Correct
and current Installation Details For
The Size of The Warmington Fire
That is to be installed.
Keep these Instructions for future reference.
Fire and flue system to comply to AS/NZS 2918
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification
Plan View of Cabinet Clearances (Straight Position)
Q
N
M
P
O
Hearth
Free standing fire box.
Side wall can be on either
or both side's of fire.
Projection of wall must not
exceed firebox face.
Plan View of Cabinet Clearances (Corner Position)
Description
SI
780
SI
780T
SI
900
To Wall Behind
L
100 100 100
To Wall Side
M
50
50
50
To Flue Centre
N
347 347 387
Hearth Depth
O
1150
1150
1200
Hearth Width
P
1200 1200 1350
Hearth Projection
Q
400
400
400
To Flue Centre
R
462 462 533
Hearth Depth
S
1455
1455
1567
Heat Output
Tested
Peak*
kW
17
19
23
Range*
kW
11-12
12-14
13-15
*All heat output values are estimates unless stated otherwise
Adapter Fitting
Seal adapter to firebox using high-temp
gasket sealant. Bolt through holes supplied.
Seismic Restraint
Secure firebox through anchor positions
provided
Q
S
M
R
Hearth
Free standing fire box.
P
Hearth and Plinth Construction
For combustible flooring an insulating hearth
and plinth of 75mm hebel is required
Ensure hearth finishing’s completed prior to
installation.
