Warmhaus RecoWa, Руководство по установке и инструкция пользователя

Страница: 16 / 28

16
warmhaus.com
5. Wait a few seconds without pressing the buttons, the device will communicate with
the Combi Boiler Control Unit and set the indicators to the accurate values. (time,
communication signal strength, battery status, ambient temperature, etc.)
6. You can display the target set temperature by pressing the up (+) or down (-) buttons
on the Room Thermostat Unit only once.
Decreasing the Temperature
Value (-)
Increasing Temperature
Value (+)
Changing the Combi Boiler Mode
(Set / CH / DHW
Mode (Winter-Summer-Off-Auto)
Light / Mode 2 / Reset
Figure 14. Setting the Temperature Value and Changing Modes via the Room Thermostat Unit
7. If you want to change the target temperature, you can
change it using the (+) and (-) keys within 10 seconds;
by pressing and holding one of the keys, it increases
rapidly by an interval of 0.1 degree, then rapidly by
an interval of 0.5 degree. After reaching the desired
temperature (if you do not press the buttons), the
set temperature is stored and it automatically returns
to the main screen (after 10 seconds) to display the
current room temperature.
8.3. DISPLAYING INDICATORS OF FAILURE AND
(WRENCH) SYMBOL ON THE ROOM THERMOSTAT
When the boiler is in a failure status, the SERVICE symbol
(Wrench symbol) appears at the bottom of the display
(see Figure 16); the corresponding failure code is displayed
when you press either up or down keys for the first time.
In this case, take the necessary actions by referring to the
Failure/Error codes in the combi boiler Installation and
User Manual.
LCD TEST EKRANI BEKLEME EKRANI
SICAKLIK AYAR EKRANI
HATA ARIZA EKRANI
Figure 15. Room Thermostat Unit
Operation Screen
Figure 16. Room Thermostat Unit
Failure Screen