35
warmhaus.com
3.1.6. Shutting off the Combi Boiler
To bring the combi boiler to OFF position while it is in
SUMMER position;
To bring combi boiler in
OFF
mode while it is in
WINTER
;
When the
MODE
button is hold,
while screen light is on after the
cycle
is completed,
letter seen on the screen, screen
light turns off, now the combi
boiler is in OFF mode.
When the
MODE
button is hold,
while screen light is on after the
cycle
is completed, combi
boiler will switch to
SUMMER
mode.
Then, when the same transaction
is repeated, after cycle is
completed
letter is seen on
the screen screen light turns off,
your combi is now at
STANDBY
position.
3.2. USE WITH ROOM THERMOSTAT
(OPTIONAL)
Combi boiler has initial preparation for remote control
connection via environment thermostats being sold
as optional sets. All Warmhaus thermostats can be
connected with dual-wired cables. Carefully read user’s
and installation instructions given in the Accessory set.
Thanks to control units with room thermostat having
program clock, you can control your combi boiler at
installation place, operating based on room temperature
and also adjust different uses depending on each day of
the week.
General Utilisation Type
• Please consult our authorized services for room
thermostats compatible with Warmhaus combi boiler.
• Do not remove device components during operation.
• Do not place at a position allowing direct sunlight
exposure or near heat sources.
• Manufacturer company shall not be responsible for
below given situations:
a) Faulty installation
b) Making intervention on the device by unauthorized
persons
c) Failing to follow instructions given in this book and
room thermostat booklets
Important:
It is compulsory to have two
different lines according to legal regulations
being in force regarding electrical installations
in case of using a thermostat On/Off on the
Remote Control. It is not allowed to use any pipe or hose
of the combi boiler as electricity or phone earthing line.
That must be ensured prior to making electrical
connections of the combi boiler.
Room thermostat should be installed at 1,25
and 1,50 m height from ground and at least 30
cm distance.
At least 30 cm distance should be available
from doors and windows open for air
circulation.
Installation Instruction:
Device installation shall only be
performed by the Warmhaus Authorized Service. The
dual cable required for installation is supplied by the
dealer/consumer.
Figure 42
Thermostat position
150 cm
Min.
30 cm
Maintenance and Service Life:
Warmhaus room
thermostat should not come into contact with water or
excessive humidity. Unless an external damage occurs,
the room thermostat does not require any maintenance.
3.3. USE OF OUTSIDE TEMPERATURE
SENSOR (OPTIONAL)
Outside Weather Temperature Sensor (optional) can
be installed in your combi boiler by our Authorized
Service (see: Installation Section; Accessory Connection
Scheme), and you can enable automatic temperature
adjustment for the radiator with immediate responses
to outside weather temperature changes via smart and
comfort operation. Therefore, it maintains an efficient
and economic operation by reducing the radiator water
temperature when outside weather temperature increases
and gradually increasing the radiator water temperature
when outside weather temperature decreases and sets
you free from making radiator temperature adjustments.
Содержание MINERWA 25
Страница 1: ...MINERWA 25 CONDENSING COMBI BOILER INSTALLATION USER MANUAL...
Страница 2: ...2 warmhaus com MINERWA 25...
Страница 49: ...49 warmhaus com 3 10 ENERGY LABEL...
Страница 50: ...50 warmhaus com...