DUPLICATE
GUARANTEE REGISTRATION
This carbon copy
DUPLICATE
Guarantee Registration will be automatically filled in when the original Guarantee
Registration in the centre pages of this booklet is complete.
DO NOT WRITE ON THIS PAGE.
Installation
1 Is the installation in a hard water area (above 200mg/litre)
Yes
No
If yes, has a suitable and effective hard water treatment been fitted?
Yes
What type of hard water treatment has been fitted?
2 What is the incoming static cold water pressure on the mains supply?
bar
3 Where in the property is the inlet group situated?
4 To what pressure is the pressure reducing valve on the inlet group set?
bar
5 Has the expansion vessel bladder pressure been checked (prior to system filling)?
Yes
6 What is the expansion vessel bladder pressure?
bar
7 Has the factory-fitted temperature & pressure relief valve been correctly piped to a suitable discharge?
Yes
8 Has the expansion valve of the inlet group been correctly piped to a suitable discharge?
Yes
9 Is the discharge arrangement piped and terminated in accordance with Building Regulations?
Yes
10 Has the discharge arrangement from the expansion / temperature & pressure relief valves been tested?
Yes
11 Have all pipes been insulated up to 1 metre from the cylinder, or to where they become concealed?
Yes
Controls
12 Have time & temperature controls been fitted in accordance with Building Regulations?
Yes
13 What type of control system has been fitted?
S-plan
Y-plan
Other
14 Are all heat sources wired through the correct cylinder / immersion limit thermostat(s)
Yes
