Warm Tech 5411074212889, Оригинальное руководство пользователя

Страница: 45 / 56

45
6.2. Manual reset/restart
If the heater is in lock-out mode, check and remove the cause of lock-out before
restarting the heater. To reset, turn the ON/OFF switch to 0 and then (afters 30 sec)
again to I. In case of repeated malfunction, call technical service. Turning the
thermostat control knob will NOT reset the heater.
6.3. Shut-down
Move switch to "OFF" (O) position. The post-ventilation phase will cool down the
combustion chamber for 90 seconds. Unplug the unit when not used for a long time.
Never disconnect the heater from mains to stop it while in
operation. Always allow the cooling sequence to be completed,
otherwise the residual heat could damage internal components.
Do not cover the heater. Do not block the air inlet and outlet.
The heater outlet is very hot during operation and after use. Do
not touch! Use personal protecting equipment if needed.
Children should be supervised to ensure that they do not play
with the appliance.
The appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge.
Unplug the heater before moving it. Never pull the cable to
unplug or move the unit.