5
2024730_d•en•2020-01-01
We reserve the right to make technical modifications
Button/
display
Action/result
e.g.
The LED for the selected weather station
flashes green. No product buttons light up.
+
Press the
and
buttons simultane-
ously.
e.g.
The LED for the selected weather station
flashes red. A running light runs through
the lower row of LEDS.
The selected receiver waves.
Press the learn button briefly
e.g.
The LED of the selected receivers flashes
red. No product buttons light up.
The weather station was deleted from the
network and now has the factory settings.
Briefly press the learn button to leave the
learn mode.
OTICE
N
How to delete the weather station from the
network using a WMS Central transmitter is
described in the operating instructions of the
WMS Central transmitter.
Assigning a weather station to channel
For a WMS receiver to be able to evaluate the weather
data, the weather station must be allocated to the chan-
nel of the receiver. Each WMS receiver can be assigned a
maximum of four sensor products.
OTICE
N
How to assign the weather station to a channel
using a WMS Central transmitter is described in
the operating instructions of the WMS Central
transmitter.
Button/
display
Action/result
On the WMS hand-held transmitter com-
fort, select the product type and channel
to which you wish to allocate the weather
station.
Press the learn button on the WMS hand-
held transmitter comfort briefly.
lights up green and the product button
and selected channel flash.
Brief
On the weather station, press
briefly.
The LED flashes three times.
GREEN: The learn report is transmitted
RED:
The learn report is transmitted,
the charge status is low
The transmission LED
on the WMS
hand-held transmitter comfort lights up
green for 2 seconds and the
symbol
goes out. The receivers belonging to the
channel wave.
The weather station is allocated to all receivers in the
channel. The control functions can now be set in these
receivers.
OTICE
N
If four sensor products have already been as-
signed to a receiver, you must first delete one
of these sensors before you can assign the
weather station to the receiver.
OTICE
N
If the weather station is assigned to a WMS
receiver that has already been combined with a
WMS wind sensor (e.g. for patio awnings), this
receiver only evaluates the wind information of
the WMS wind sensor. All other weather data of
the weather station can be evaluated normally
by this receiver.
