Introduction
2007645 [Rev. 2 - en]/2016-03-22
Page 3 | 12
1
Introduction
1.1
Information on safety
It is important to follow these instructions in the interests of
personal safety. Failure to comply with these instructions
when operating the product may result in personal injury
and/or property damage. Failure to comply with these
instructions relieves WAREMA of liability.
Warnings are marked in the instructions with this
symbol or a similar symbol.
Read through the product instructions carefully
before installation and use.
Read and follow all safety, setting, operating and
maintenance instructions.
Include these instructions if you pass the product
on to a new owner.
Keep the instructions until you dispose of the
product.
1.2
Information on the target group and
application of these instructions
Target group
These instructions are directed at people who install,
operate, care for and/or maintain the product.
Knowledge of occupational safety, accident prevention
regulations, working with ladders and scaffolding,
attachment of fixing materials, assessment of the building
fabric, and commissioning and operation of the product is
required for installing the product.
If any of these qualifications are unavailable, the work must
be carried out by a specialist fitting company.
Contents
These instructions are an integral part of the following
product: Pleated blind with handle Type PB/PK
These instructions contain important information on the
handling, installation, commissioning, operation, care
and maintenance of this item. Other versions or special
solutions are not dealt with.
Permissible activities
Performing tasks on the product that are not described in
these instructions is not permissible. No other alterations,
additions, conversions or maintenance work is to be
carried out on the product other than as described in these
instructions without the written approval of WAREMA.
1.3
Basic safety instructions
The safety instructions and warnings described here
are intended to safeguard your health and to protect the
product. These instructions must be read carefully and
followed.
Damage resulting from inappropriate use or the failure to
follow these instructions is not covered by the warranty.
Liability will not be accepted for secondary damage.
Installation preparations
Improper installation may impair the safety, function and
service life of the product. This may result in injury to
persons and/or cause damage to the product and adjacent
parts.
If the skills necessary for installing the product are
not available, have the product installed by a qualified
specialist
Comply with the sequence and the specified installation
steps.
Install the product only if it is in technically perfect
condition.
General operation
The operation of a faulty product may injure persons and/or
damage adjacent parts.
Only operate the product if it is in technically perfect
condition.
If the product makes unusual noises or movements,
stop using it immediately and inform a qualified
specialist.
