3
warema_890416_alhb_en_v2•2022-10-01
We reserve the right to make technical modifications
Obligations for the disposal of electrical
devices
A marking with this symbol indicates the following
obligations under the scope of legal regulations:
The owner of this electrical device must dispose of it
separately from unsorted municipal waste for further
recycling.
Used batteries and accumulators that are not enclosed
in the old device, as well as lamps/bulbs that can be
removed from the old device without breaking, must be
disposed of separately.
Distributors of electrical devices and disposal compa-
nies are obliged to take back the equipment free of
charge.
The owner must take it upon themselves to delete any
personal data contained in the electrical device prior to
disposal.
Liability
Failure to comply with the product information in these in-
structions and use of the unit in a manner that contravenes
its intended use and purpose may result in the manufactur-
er refusing to honour warranty claims for product damage.
In this case, liability for consequential harm to persons or
damage to property will also be excluded. Follow the in-
structions in the operating instructions of your sun shad-
ing system. Liability is also excluded for damage to the sun
shading system resulting from operation under icy condi-
tions.
Technical data
LONMPM 8DI/8DO
Min.
Typ.
Max.
Unit
Supply voltage
207
230
253
V AC
Network frequency
50
Hz
Current consumption with
all relays pulled in
106
119
130
mA
Current consumption
without relay
32
mA
Thermal fuse (primary)
115
120
125
°C
Safety class
(with protective earth)
I
Floating output
Switching capacity at 230
V AC / cos ϕ 1
16
A
LON
®
input
FTT-10
Inputs, local operating elements/contacts (make contact)
Local voltage active
8
12
15
V DC
Local current active
0.3
0.6
1
mA
Local voltage inactive
-0.5
0
1.5
V DC
Conformity
This device complies with the EMC directives for use in residen-
tial and commercial areas.
Ambient conditions
Operating temperature
0
20
50
°C
Storage temperature
0
50
°C
Rel. humidity
(non-condensing)
10
40
85
%RH
Degree of soiling
2
Connection
Supply line, drives, push
buttons
Screwed terminals
Network
Spring terminals
Wire cross sections
Supply line, drives, push
buttons
Max. 2.5 mm
Network
Max. 0.8 mm
∅
Housing variants
Degree of protection
AP/REG housing
IP30
Article numbers
LONMPM 8DI/8DO REG
1002816
LONMPM 8DI/8DO AP
1002817
Strain relief set for AP
housing
1002236
WAREMA Renkhoff SE
Hans-Wilhelm-Renkhoff-Strasse 2
97828 Marktheidenfeld
Germany
210 mm
180 mm
60 mm
119 mm
184 mm
-
Fig. 6
Dimensions of surface-mounted housing
60 mm
95 mm
90 mm
210 mm / 12 TE
12 TE / 210mm
Fig. 7
Dimensions of DIN rail-mounted housing
