2016156_b•en•2020-02-01
We reserve the right to make technical changes
2
Commissioning
After the installation has been completed and the operat-
ing voltages have been applied, the device can be oper-
ated using a keypad (Fig. 2).
You will find a detailed description on the further commis-
sioning in the KNX manual (art. no. 2014 787).
Local operation
The keypad has 4 buttons, the Up / Down / Select and
Prog buttons, and an LED. The Select button is used to se-
lect the channel. The selected channel is displayed by one
of the 8 channel LEDs. If the SEL button is pressed again
after selecting channel 8, all channels are selected.
Fig. 2
Keypad
Local operation on the device has the same priority as
manual operation via communication objects. The operat-
ing behaviour is the same as the "KNX behaviour":
Brief push of the button = Step / Stop,
Long push of the button = Move.
WARNING
Never randomly press the buttons on the
keypad without having a line of sight to
the sun shading system.
Programming
Press the programming button (Fig. 2) to
put the device into programming mode. The
LED lights up red when programming mode
is active. The device is programmed on a
PC using the ETS. This software ends the
programming mode automatically. The red
LED goes out.
If the programming mode is to be ended
earlier, press the programming button again.
The red LED goes out.
Maintenance
There are no parts inside the device that require mainte-
nance. In the event of a malfunction, the built-in miniature
fuses should only be changed by a certified electrician.
Liability
Failure to comply with the product information in these in-
structions and any use of the device other than its intend-
ed use may result in the manufacturer refusing to honour
warranty claims for product damage. In this case, liability
for consequential damage to persons or property will also
be excluded. Observe the information in the operating
instructions for your sun shading system. The automatic
or manual operation of the sun shading system while iced
over as well as using the sun shading system during se-
vere weather may cause damage and must be prevented
by the user through suitable precautions.
Disposal
After use, the device must be disposed of according to
legal regulations or turned in to your local recycling centre.
