11
!
Red
White
Red
Gray
for motor(fan)
for motor(fan)
for motor(fan)
Red
Gray
Pink
Assembly— Hanging the Fan (continued)
6. Making the electrical connections
Motor to receiver electrical connections:
1. Connect the fan wire with receiver wire by connect terminal.
2. Connect the lamp
wire with receiver wire by connect terminal.
Receiver to house supply wires electrical connections:
1. Connect the receiver white wire marked "AC in N" to the household white wire (neutral) using
a wire terminal block.
2. Connect the receiver Black wire marked "AC in L" to the household Black wire (hot) using a
wire terminal block.
3. Connect the fan wire and the ground wire on the hanger through the terminal block.
4. Use the terminal block to connect the ground wire on the mounting bracket to the household
ground wire.
Antennd wire
!
!
WARNING: To avoid possible electrical Shock turn
the electricity off at the main fuse box before wiring.
If you feel you do not have enough electrical wiring
knowledge or experience, contact a licensed electrician.
WARNING: Check to see that all connections are tight,
including ground, and that no bare wire is visible at the
connect Terminal blocks,except for the ground wire.
CAUTION: Do not use with a wall light dimmer switch
NOTE: The fan must be installed at a maximum distance
of 20 ft.from the remote control for proper signal
transmission between the remote control and the fan's
receiving unit.
Terminal blocks
L
N
Yellow/Green
Yellow/Green
Yellow/Green
Pink
Ground wire
Ground wire
White
Blue
Blue
White
for motor(light)
for motor(light)
