INSTALLATION INSTRUCTIONS
TOP SHELF
1.
Measure the width of the wardrobe at the height the top shelf is to be installed.
Wall Brackets are marked “L” and “R” for left/right, and have a closed rim at the front and an open end at the
back which is designed so your top shelf sits hard against the back wall and the front rim stops the shelf falling
forwards. Wall brackets are 3mm deep each, so if your top shelf will run from wall-to-wall you will need to deduct
6mm from this measurement to get your final top shelf length.
Example: If your wall-to-wall measurement is 2000mm wide, then you need to cut your top shelf 1994mm wide.
If you are using two top shelves together (ie for wardrobes wider than 2.4m, or for walk-in wardrobes where top
shelves meet adjacently) then you will need to apply a 3mm deduction where a bracket is to be used.
2.
Mark on your top shelf where you need to cut. Tip: Use masking tape along the cut line. This will give the
melamine board a cleaner finished edge. Cut the top shelf using a saw. We recommend a minimum of an 8pt saw
to cut melamine.
3.
Place top shelf in position with the bracket, and pencil mark the position of the bracket (use a spirit level to
ensure your top shelf is level). Remove the top shelf, and re-align the bracket with your pencil marks. Use the
bracket as a template to mark out the holes for the screws.
