3.
There are 3 fixed shelves. Insert Cams into the fixed shelves, arrow facing outwards.
4.
On one of the side panels, slot the top shelf into the first fixed shelf position. Ensure the white edge of the shelf is
at the front of the tower, and that the cams are facing the ceiling at the top of the tower.
Once the shelf is in place, tighten the cams with screwdriver. Be careful not to overtighten.
Repeat with the middle and lowest fixed shelf, but ensure the cams are facing the floor.
5.
Once drawer runners have been installed on both side panels, lower the second side panel into place where Cam
Pins meet with fixed shelf Cams. Screw Cams to tighten.
6.
Turn tower on to its front, and align the back board with the tower. The white side should be seen, and natural
side faces the wall. Use tacks to secure backboard to the tower. We recommend tacks in each corner and at
every shelf height.
