waratah HTH623C, Руководство оператора

Страница: 23 / 96

Safety: Operation Precautions
T7M7G6M,000042F -19-30AUG21-1/1
T7M7G6M,0000430 -19-02JUN20-1/1
Operating Precautions
1. Prior to starting work, check all equipment controls
and ensure the harvester head responds correctly.
2. Inspect the saw chain shot guard and the saw chain
catcher for damage or wear.
3. Maintain a safe operating distance between the
equipment and other personnel. Never swing
the boom, attachment, or load over the heads of
bystanders.
4. Before moving the vehicle, raise the harvester head
and, when travelling, keep it high enough to clear
stumps or other objects.
5. Strictly adhere to all work site regulations to ensure
safe operation of this equipment.
Avoid Work Site Hazards
Avoid contact with gas lines, buried cables, and water
lines. Before starting work, contact utility line location
services to identify all underground utilities.
Prepare the work site properly. Avoid operating near
structures or objects that could fall onto the machine. Clear
away debris that could move unexpectedly if run over.
Avoid hoist (boom) or attachment contact with
overhead obstacles or overhead electrical lines.
Never move the machine closer than 3 metres (10 feet)
plus twice the line insulator length to overhead wires.
Keep bystanders clear at all times. Use barricades or
a signal person to keep vehicles and pedestrians away.
Use a signal person if moving the machine in congested
areas, or where visibility is restricted. Always keep the
signal person in view and use radios or hand signals to
maintain communications.
Operate only on solid footing with sufficient strength to
support the machine. Be especially alert working near
embankments or excavations.
Avoid working under over-hanging embankments or
stockpiles
that could collapse under or on the machine.
Reduce the machine speed when operating with tools
on or near the ground when obstacles may be hidden
(for example, during snow removal or clearing mud). At
high speeds, hitting obstacles (rocks, uneven concrete,
or manholes) can cause a sudden stop: always wear
a safety belt.
TX1268638
M
M
TX1268638
—UN—21NOV18
Operate Machine Safely
1-4-1 053122
PN=23