waratah HTH618C, Руководство оператора

Страница: 5 / 92

General
T7M7G6M,00004BA -19-15JUN20-1/1
T7M7G6M,0000667 -19-30AUG21-1/1
T7M7G6M,0000668 -19-13APR21-1/1
T7M7G6M,0000669 -19-13APR21-1/1
Foreword
READ THIS MANUAL carefully to learn how to operate
and maintain your machine correctly. Failure to do so
could result in personal injury or equipment damage.
This manual and the safety signs on your machine may
also be available in other languages. (See your Waratah
dealer to order.)
THIS MANUAL SHOULD ALWAYS remain with the
machine, even if you sell the machine. It provides detailed
operating and maintenance instructions as well as safety
information and equipment data.
MEASUREMENTS in this manual are given in both metric
and imperial equivalents. Use only correct replacement
parts and fasteners. Fasteners may require a specific
metric or inch wrench.
RIGHT-HAND AND LEFT-HAND sides are determined by
facing in the direction of forward travel.
WRITE PRODUCT IDENTIFICATION NUMBERS in the
machine numbers section on page 3-2-1. Accurately
record all numbers to help in tracing the machine should
it be stolen. Your dealer also requires these numbers
for ordering of parts. File the identification numbers in a
secure place off the machine.
WARRANTY is provided as part of Waratah New Zealand
Limited's (“Waratah's”) support program for customers
who operate and maintain their equipment as described in
this manual. The warranty is explained below.
Waratah will back its products where defects appear
within the warranty period. Waratah may also provide field
improvements at times, often without charge, even if the
product is out of warranty. If the equipment is abused,
or modified to alter its performance from published
specifications, the warranty will become void and field
improvements may be withheld
Copyright
These original instructions are the property of Waratah
New Zealand Limited.
All information, illustrations, and specifications provided in
this manual are based on the latest information available
at the time of publication. We reserve the right to make
changes at any time and without notice.
COPYRIGHT © 2021
WARATAH NEW ZEALAND LIMITED
Tokoroa, New Zealand
All rights reserved.
Issue date: September 2021
General Information
This manual contains instructions for the maintenance
of the HTH618C harvester head. If you have questions
about the instructions, please consult your local dealer for
more detailed information.
Every effort was made to ensure that the information
contained in this manual was accurate at the time of
publication. Waratah, however, accepts no responsibility
for any errors or consequences arising from them.
Waratah also reserves the right to revise product
specifications, instructions, etc. as required by ongoing
product improvements and updates.
All service and repairs should be carried out by qualified
service personnel, or an authorized repair shop with
suitable tools and lifting devices, using Waratah-approved
parts. Waratah takes no responsibility for damages that
may arise through instructions not being followed or
through improper use of the product.
Manual Replacement
When re-ordering this manual, quote the part number
“WA116921” and the date of publication.
1-1-1 090721
PN=5