Wanzl wire tech 100 Скачать руководство пользователя

Страница: 5 / 36

Item no. 43.99990.BA-EN07 / 27.09.19

5/36

Safety

2.3

Warnings and safety instructions

WARNING!

The product may tip or break if loaded unevenly, overloaded or used

improperly.

The result: Breakage of the product and risk of injury to persons and/or damage

to property.

►

Only place the product on a firm, even and level surface.

►

Ensure that the existing floor is able to support the surface pressure exerted by the

product.

►

Use fastening material that is appropriate for the walls.

►

Use longer screws and spacer sleeves for deeper-seated concrete layers.

►

Only load the product evenly, not just on one side.

►

Do not overload the product.

►

Only use the product as intended.

►

Do not continue to use a defective product. If necessary, have it repaired.

►

Ensure that there is no danger or risk of injury to persons.

WARNING!

If using a top frame or gondola end shelf, the product may tip or break if load-

ed haphazardly.

The result: breakage of the product and risk of injury to persons and/or damage

to property.

►

Always load the gondola axis first and only then the shelves of the top frame or end

shelves.

►

First empty the shelf at the top frame or end shelves and then the gondola axis.

►

A load >the total load of the loaded shelves of the top frame or end shelves must be

applied in the gondola axis (equilibrium).

WARNING!

There is a risk of injury when installing or setting up the product.

The result: injury to hands or feet due to crushing or shearing.

►

Note the risk of injury to hands and feet when installing or setting up the product.

►

Only have the product installed by trained and qualified staff.

►

Install the shelving system with the assistance of a second person.

►

Be aware of the risk of injuries from parts that may tip over during the installation.

►

Wear safety gloves during the installation.

►

Wear safety goggles during drilling work.

Содержание wire tech 100





































Результаты поиска

Содержание wire tech 100

Отзывы:

Похожие инструкции для wire tech 100

Бренды по названию

Популярные бренды

Wanzl wire tech 100, Руководство пользователя

Результаты поиска

Содержание wire tech 100

Отзывы:

Похожие инструкции для wire tech 100

Бренды по названию

Популярные бренды