Support Email/ Skype: [email protected]
31
4.4.3 Playback SD/TF Record
4.4.4 Alarm Setting
Alarm Deployment
IO Detection
：
When tick the IO Detection, user can choose sensor type (Always open or Always close). When user choose Always
open, external alarm device is needed, and when the alarm is triggered, the IO detection will send alarm. If choose Always close,
the camera will send alarm continuously per 30 seconds.
Motion Detection
: Sensitivity can choose Low/ Middle/ High according to needs.
Audio Detection
: Sensitivity can choose Low/ Middle/ High according to needs.
Temperature detection:
the temperature range can be set from -100
℃
to 100
℃(
not for this camera
)
“<”means the temperature below the set value, the camera will send alarm notification.
“>”Means the temperature above the set value, the camera will send alarm notification.
Humidity detection:
the humidity range can be set from 0% to 100%.
(
not for this camera
)
“<”means the humidity below the set value, the camera will send alarm notification.
“>”Means the humidity above the set value, the camera will send alarm notification.
Trigger Alone :
The alarm will be triggered for any kind of alarm condition.
Trigger Linkage
: If set two or more kinds of alarm methods, only met all alarm conditions, the alarm can be triggered.
Enter Playback SD/TF Record, recorded
file will be automatically displayed.
User can also search needed files by click
icon to enter calendar to check
schedule or alarm record on an exact date.
Notice
：
The date with red dot means there
are recorded files on that day.
Access to “Alarm Setting”, there are
options for Alarm Deployment and
Alarm Action.
