Wanroy WY51100, Руководство пользователя

Страница: 7 / 24

The installation location should be away from water sources, such as taps, sewage pipes
and sprinklers, to avoid water entering the equipment.
WY51100
7
Do not operate the device without a ground cable.
The device should be permanently connected to the protection grounding cable. Before
operating the device, check the electrical connections of the device to ensure that the device
is grounded reliably.
Do not damage the ground conductor.
This device is for indoor use only, do not use this product in outdoor environment.
Do not install or use the device in a temperature lower than -10°C or higher than 50°C.
The highest altitude at which this equipment can be installed is 2000 meters.
This product should be installed in a dry, well-ventilated environment to ensure good heat
dissipation performance.
2.5 Installation Environment Requirements
The installation location should be away from the fire source.
The operation and service life of the accumulator are related to the
operating temperature.
The temperature at which the accumulator is installed should be equal
to or better than the ambient temperature.
Maximum temperature
+50
°C
Minimum temperature
-10
°C
+5%~+95%
Relative humidity
The device should be installed and used away from children and animals.
The device shall be placed on a firm, flat supporting surface.
Do not place any flammable or explosive materials around the device.
When the device is running, do not block the ventilation holes or heat dissipation system to
avoid fire caused by high temperature.
3. Product Introduction
3.1 Product Introduction
The energy storage system adopts lithium iron phosphate battery with excellent performance
and long life. At the same time, it adopts modular structure design. Each energy storage
module with the intelligent BMS system is internally integrated and easily expandable.
WY51100 can match inverters of major brands, such as SMA, Victron, Growatt,
GoodWe, Deye, Jinlang, SRNE etc.