manualshive.com logo in svg

Wanner Engineering Vector 2000 Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wanner Engineering Vector 2000 Series Скачать руководство пользователя страница 8

Wanner Engineering, Inc.

8

United States 

Instant Information:   www.vectorpump.com

(612) 332-5681   Fax (612) 332-6937                          VEC-991-2400E

W0466

Inlet (Suction)
    Opening

Figure 12

Setting Roller Pressure

Note: The pressure setting must be checked when a new hose 

is installed, because of variations in hose thickness.
1.  Remove front cover from pump.
2.  Remove any shims under two roller holders.
3.  Be sure bolts securing roller holders are tight.
4.   See Figure 12. Start pump. Place  palm of hand over suction 

opening and check for vacuum.

  a.  If there is vacuum on first attempt, rollers are set. 

  b.  If not enough vacuum, gradually add 0.02 in. (0.5 mm). 

shims under one of rollers and repeat test until suction 

seems to be correct. 

Contact factory before installing 

more than four shims under each roller.

5. Add same number of shims under other roller.
6. Test pump in full operation, and readjust as necessary.
7. Reattach front cover.

Service (Models 2006 and 2007)

Содержание Vector 2000 Series

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды