WANHAO DUPLICATOR I3 MINI, Инструкция по эксплуатации, Страница: 11 / 38

3D Design
Having a 3D design is the fi rst step to creating a 3D Object.
There are a number of free 3D Designs that can be downloaded
and printed for personal use. Websits such as Thingiverse.com,
Pinshape.com and YouMagine.com are a good place to start,
but there are many more available!
INTRODUCTION
support material.
Setup WANHAO 3D Printer
It's important to check your printer before every print.We've included
some steps on page 21 in section 4.2 Good 3D Printing Practices
for you to quickly refer to each time.
3D Printing Process
Now that you've loaded a GCODE file onto the printer,it will
commence heating up the Extruder, then start printing. While
printing, the nozzle will move along the X and Y acis as each layer is
printed. This can take some time,depending on the size of the 3D
model, print speed of the 3D printer and resolution of each layer.
Here is an example of how size,infi ll,and resolution can affect printing time:
Dimensions:
Infi ll:
Resolution:
Print Time:
Filament Used:
62.5 x 25.75 x 67.75mm 70 x 70 x 140mm
20%
0%
2mm
2mm
53min
39min
4m
2.54m
20% 20%
2mm
1mm
6hr 40min
13hr 12min
45m 45.67m
3D Printed Object
Once the printer has completed all of the layers, you will have a 3D Printed Object. The
results are certainly worth it, with 3D models ranging from simple to complex.
11