WANHAO Duplicator 4, Руководство пользователя

Страница: 41 / 48

E Troubleshooting , Diagnostics , and Maintenance
40
------------------------------------------------------------------------------------------------------------------------------------------
--------
USING WANHAO REPLICATORG
-------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
---------------------------------------------------------------
-------------------------------------
1. Can't load WanHao
Filament into the
extruder
Make a fresh cut at the end of the Filament.
Cut the Filament at an angle—a narrow tip
will help with loading.
PROBLEM
SOLUTION
Use more force when pushing the Filament into
the extruder. Grasp the filament firmly and push it
into the middle of the hole on top of the extruder.
Ensure that you insert the Filament straight down
into the extruder, not diagonally.
After you feel the motor grab the filament,
continue to maintain pressure on the filament for
another five seconds.
2. Object is stuck to
build plate
Wait for the object to cool down. Objects will
detach more easily after they have cooled.
If the object is still stuck, take a thin metal craft
spatula and carefully work the blade under the
edge of the object. When the blade is most of the
way under the object, twist the handle slightly. The
object should come free.
3. Can't remove the
Filament from extruder
Run the filament load script in the onboard Utilities
menu and let the filament advance for about five
seconds. Then run the unload script again.