WangYe WY50QT-86, Руководство пользователя

Страница: 17 / 22

- 28 -
The spark plug
（
diagram 28
）
Spark plug types
Standaed
：
C7HSA
（
NGK
） 、
A7T or A7RT
•
Disconnect the joint of the spark plug cover and take
apart the spark plug with special tool.
•
Check if any accumulated carbon or dirt, clean them in
cleanser or brusher. Replace the spark plug if badly
corroded.
•
Normally the gap between side electrode (1) and Center
electrode (2) is 0.6-0.7 mm
•
Don
’
t use the other types spark plug
。
Change the fuse
The rated electric current of the fuse is 15 A
If the fuse often burns down, it indicates the short circuit or overload in the electric system.
Ask the serviceman to repair it, and never use the brass wires to replace the fuse.
(0.6
～
0.7)mm
1
2
Diagram 28
- 29 -
V Motorcycle storage
STORAGE
For the motorcycle not to be used for a long time, some steps should be taken to prevent
malfunction and damage to the parts. Besides, before the long-time storage, proper repairs should
also be done.
•
Change the engine oil.
•
Drain out the fuel in the fuel tank and carburetor.
Warning: Gasoline is inflammable and may cause fire and even explosion under certain
conditions. Therefore, do not smoke or make fire.
n
Take apart the spark plug, inject about 15~20ml oil into the cylinder, step down the kick
pedal several times and then fix the spark back on.
u
Take apart the battery and place it in a place without strong light or frozen ice, charge it every
month.
u
Clean the vehicle and wipe it dry, coat the wax on the surface of the paint, and anti-rust oil on
other metal parts.
Cover the vehicle and put it in a cool place.