WangYe WY50QT-86, Руководство пользователя

Страница: 10 / 22

- 14 -
Starting engine(diagram 19)
•
Preparation
：
release the vehicle main stand,pull the key in to
ignition switch and trun to
“ ”
.
•
Electric-start: press start button (1) while applying the
throttle slowly, and the engine starts in less than 5 seconds.
Attention
：
•
Before starting the engine,hold the brake handle tightly.
•
When eleectric-start fails,try it again after 30 seconds.If
it also doesn
’
t work,please try kick-start.
•
Engine kick-start : Turn ignition switch on and apply the throttle slowly, step
kick-starter pedal down quickly with strength.
Attention
：
After starting the engine, do pull the pedal back to original position.
To use the vehicle after a long time, it is better to kick the pedal several times at first with
ignition switch off, so the engine can start easier.
•
If cold start the engine, warm up engine for about 3 minutes before driving.
Diagram 19
- 15 -
Driving the motorcycle
Warning
•
When riding the motor, the temperature of the exhaust pipe and muffler is very high, so
you
’
d better wear long pants to avoid touching with the hot parts of the exhaustion
system
•
It is necessary to wear helmet, goggles and gloves while riding the vehicle
•
When driving,do not wear loosen or unsuitable clothes. Otherwise the clothes may hook
with the handle bar, start pedal or the stand.
•
Each equipment of the motorcycle should accord with the traffic law of local
government
•
Attention
：
Control the speed and payload during the first1000kmPayload among100kg
is appropriate (including driver)Overtaking and overloading will shorten the life of
engine, so change the crankcase oil after 300km.
Speed reference 2
：
Blank 2