W&T rule.box 53920, Руководство по эксплуатации

Страница: 13 / 30

13
⛳
Set up power supply via external power supply unit
⚠
WARNING 0 Danger to life due to electric current
The use of an incorrect power supply can lead to accidents with electric current
and fire
🢂
Only use power supplies according to the specification
🢂
Observe documentation
🢂
Observe safety regulations
The rule.box can be supplied with voltage via an external power supply unit.
Such a power supply must be potential-free and the reference ground for
the output voltage must not have a direct connection to the protective earth.
Furthermore, a safe isolation between the extra-low voltage side and the supply
network according to EN60950-1, as well as LPS property are mandatory.
• a power supply unit that meets the specifications (see Accessories
section)
•a screwdriver
1. Attach the green terminal adapter to the power supply unit
2. Plug the green terminal adapter into the socket on the device
The rule.box starts operation.
Connect network cable
The rule.box is equipped with one or two network interfaces, depending on the
model. For the connection to a network you need:
•a patch cable
1. Use a patch cable to connect the rule.box to the network into which you want
to integrate the device.
The rule.box is connected to the network.