W&T rule.box 53920, Руководство по эксплуатации

Страница: 12 / 30

12
3. Installation
👥
Installers
The following section is intended for the installers of the rule.box and assumes
appropriate expertise.
Mounting in the control cabinet
⛳
Mount on top hat rail
❗
Note: Risk of property damage imminent
Please observe the safety instructions in chapter 1.
The rule.box can be mounted on DIN rail (TH 35).
1. Place the rule.box slightly angled upwards with the receptacle on the upper
edge of the top-hat rail.
2. Press the device against the top-hat rail from the top front until the holder
clicks into place.
The rule.box is now firmly mounted on top-hat rail.
Set up power supply
⛳
Set up power supply via PoE
The rule.box can be electrically supplied as a device of power class 2 via PoE
according to IEEE802.3af. For this you need
• A PoE switch or a PoE injector
1. Connect the rule.box on „Network“ or „Network 1“ to the PoE switch / the
PoE injector via a shielded network cable.
The rule.box starts operation.