15
#33204
Subject to error and alteration
Speed configuration
The USB-Isolator #33204 supports USB devices that operate in full
speed mode at 12 MBit/s or low speed at 1.5 MBit/s.
Switching between both speed is accomplished by means of
two plug-in jumpers located inside the Isolator. One jumper each
configures the upstream and downstream side of the Isolator.
If the jumper is plugged into the position labeled „Low Speed“, the
corresponding Isolator terminal runs at 1.5 MBit, whereas the port
in the other position of the jumper runs at full speed.
