manualshive.com logo in svg

W&T Electronics 57713, Руководство пользователя

Поделиться
Скачать
W&T Electronics 57713 Скачать руководство пользователя страница 48

48

W&T

Example:

http://<ip-adresse>/thermo.csv?start=01012010T123000&end=30032010T200000&DTb=3&

The above expression generates a CSV file which contains 
the measurement data from 01.01.2010, 12:30 p.m. until 
03.30.2010, 8:00 p.m. in 1 minute intervals.

To request the individual current measurement value, send:

GET /Single1

for the 1st measuring channel

GET /Single2

for the 2nd measuring channel, etc.

To receive an output for all measuring channels, send:

GET /Single

without Index.

14.2 Requesting via UDP

Open a UDP connection to the IP address of the device or 
to the Net-ID as a broadcast and Port 42279 (preset can be 
changed).

Then send one of the above GET /Single expressions to the 
device and the device will return the measurement values on 
the port you are using.

i

When using multiple devices it may make sense to also 
have the name and IP address of the device included 
with broadcast messages. To do this, select “Enable GET 

Header” under “Communication paths >> Socket access”.

Содержание 57713




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды