manualshive.com logo in svg

W&T Electronics 57713, Руководство пользователя

Поделиться
Скачать
W&T Electronics 57713 Скачать руководство пользователя страница 12

12

W&T

                                     

Speed

Link/Activity

Speed (yellow)

  

OFF: Simultaneous illumination/flashing of the Link/Acti-
vity LED means there is a link to a device at a rate of 10 
MBit/s (10BaseT).
ON: Simultaneous illumination/flashing of the Link/Acti-
vity LED means there is a link to a device at a rate of 100 
MBit/s (100BaseT).

                                         

Speed

Link/Activity

Link/Activity (green)

 

OFF: The device is not detecting a Link pulse from a hub 
or switch. Check the cable or the hub port.
ON: The device has a valid link to a hub or switch. The 
Speed LED indicates the data rate in this case.
Flashing: The device is receiving or sending network pak-
kets.

Additional LEDs (internal: #57713, #57714, #57715, 
#57718, 57720, external: #57716)

■ 

 on error http://xxx.xxx.xxx.xxx/diag -LED: Indicates inter-

nal configuration errors. For troubleshooting, please open 
the page http://xxx.xxx.xxx.xxx/diag in the device.

■

  system error: Serious hardware error. Attempt to start the 

device up again by interrupting supply voltage. If the con-
dition persists, please return the unit for inspection. 

!

If the Web-Thermometer has no IP address or 
Address 0.0.0.0, the on error and system error LEDs 
remain on! The system error LED flashes 3x after a brief 

time. The LEDs do not turn off until an IP address has been 

Содержание 57713




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды