12
ADJUSTING THE ROLL HOLDER
The sealing machine may operate:
o
With the roll holder in lower position, and one roll;
o
with the roll holder in extended position, and one or two rolls.
To extend the roll holder:
1)
Press the two buttons on the side columns of the roll holder;
2)
Lift the two extensible columns until the two buttons engage the
upper holes.
NOTE: for easier adjustment, remove the roll holding tube.
WARNING:
When the roll holder is extended, install the lighter rolls in the upper tube.
Maximum total weight 5 kg.
To lower the roll holder:
1)
Press the two buttons on the side columns of the roll holder;
2)
Push down the two extensible columns until the two buttons
engage the lower holes.
NOTE: for easier adjustment, remove the roll holding tube.
Button
Button
Installation
Содержание SealVal2
Страница 1: ...SealVal2 ENG Rev 00 Instructions for use...