W&H Osmo, Инструкция по эксплуатации

Страница: 20 / 36

Step Description Image
1
Slowly opens the water network tap and insert the
Osmo mains cable into the power socket.
Note: make sure there is no leakage and there are no
traces of water on the bottom of the equipment.
Do not operate the equipment without having
opened the water supply first.
The pump can suffer irreparable damage if run dry.
2
Let the water come out of the “DRAIN” tube until it is
clean and free from black bits and other residuals.
3
Open the storage tank tap.
6. Priming
20
5 ÷ 15 min