MACHINE EXPLODEDVIEW
When
reinstalling
the vari feed
unit after a
repair
check
the chains
for
proper
tension
. The
short in feed
chain should
have a small
amount slack
in it and the
long out feed
chain should
have plenty
of slack. This
is the correct
setting. To
obtain the
correct
setting, in
most cases,
you would
push the unit
toward the in-
feed end of
the machine
as you tighten it using up the attaching bolt hole clearance for adjustment. This should give you the
optimum chain tension and slack.
VARI-FEED VIEW
VF-100 assembly
Does not include roller sprockets and chains
VF-1 Vari-Feed motor
VF-2 REV A Aluminum motor mount
VF-3
Roller sprockets,14 tooth
VF-4
Short chain, 36 pitch
VF-5
Long chain, 54 pitch
VF-9 REV A Chain guard
14