WANDERS Elm, Руководство пользователя и инструкция по установке

Страница: 17 / 60

17
GB
Your Elm stove at a single glance
The Elm is a combination of comfort and effi cient
heat emission. The large glass panes allow
emission of the heat from the stove directly to
the environment to make your room instantly
comfortable. The built-in fl ue gas defl ector
ensures circulation of fl ue gases in the interior
parts. Combined with the extra after-burning, it
means that the fl ue gases have better combustion
and reduce the burden on the environment. You
can regulate the intake of combustion air with the
integrated air slide valve and adjust the intensity
of the fi re and the output of your stove.
Installation
It is common practice for the dealer where you purchased your Elm stove to also take care of installing it. If this is
not the case, please ensure that the installation is done by a certifi ed installer. A certifi ed installer can also give you
the right advice about the fl ue tube to which the stove must be connected. Connecting wood-burning stoves by
unqualifi ed persons is prohibited, in which case we cannot give any guarantee about proper functioning of your
Elm stove. Please bear the fi re safety in mind when installing the stove. See also page 21.
The wood-burning stove is suitable as an extra heat source and does not replace your principal heating device,
such as your central heating system.
Lighting the stove
Lighting your stove early in autumn or late in winter
When the external and internal temperatures do not diff er much, a proper chimney draught is a challenge. Early
in autumn or late in winter you can help chimney draught get started by burning some wood while keeping all air
inlets maximally open. An abundant air supply speeds up quick heating which in turn increases the draught in the
chimney. Lighting up the stove with only a little wood prevents smoke from streaming into the room.
The stove will become very hot when you light it and will need at least two hours to cool off . Don’t touch the stove
without protection during fi ring and for two hours after. Handle the stove always with a glove to avoid getting
serious burns.
Before lighting the fi re, you must clean away any deposits on the window pane with a paper from a kitchen roll.
The same paper can be used for lighting the fi re.
A