Wanco AB Series, Руководство пользователя

Страница: 26 / 36

22 Owner’s Manual
Wanco Two-Bearing Belt-Drive Generators
3.2 Operating the generator
1. Before operating the generator, follow all instructions in Section 3.1.
2. Start the engine, referring to engine manufacturer’s instructions if
necessary.
3. When adding AC loads to a generator, always start with the big
loads first. Electric motors require 3 to 5 times rated amperage and
wattage to start. For reference, see Appendix A, page 1.
3.3 General maintenance
The generator should be run at least once a month for a few
minutes to keep all components in proper operating condition.
All ball bearings are sealed and require no servicing. There is no
maintenance required on any other components of the generator.
Store the generator in a warm, dry location.
CAUTION
Load on generator at startup or shutdown can damage
equipment.
Remove all electric loads from the generator before starting or
stopping the engine.