WANAI WAP1-08BC, Руководство пользователя, Страница: 17 / 22

15
- Power supply is AC110-120V
，
60Hz
2. Cooling operation
-
Press the “Mode” button till the “Cool” icon appears.
- Press the “
▲
”or“
▼
”button to select a desired room temperature. (60
℉
-88
℉
)
- Press the “Fan Speed” button to select wind speed.
3. Dehumidifying operation
Press the “Mode” button till the “Dehumidify” icon appears .
-
Automatically set the selected fixed temperature.
- Automatically set the fan motor to default fixed LOW wind speed.
4. Fan operation
- Press the “Mode” button till the “Fan” icon appears.
- Press the “Fan Speed” button to select wind speed.
5. Timer operation
Timer ON setting:
-
When the air-conditioner is OFF, press the “Timer” button and select a desired ON time through the
temperature and time setting buttons.
- “Preset ON Time” is displayed on the operation panel.
-
ON time can be regulated at any time in 1-24 hours.
Timer OFF setting
-
When the air-conditioner ON, press “Timer” button and select a desired OFF time through the temperature
and time setting buttons.
- “Preset OFF Time” is displayed on the operation panel.
-
OFF time can be regulated at any time in 1-24 hours.
6. Water Drainage
Water Full Alert Function
The inner water tray in the air-conditioner has one water level safety switches, it controls the water
level. When water level reaches an anticipated height, the water full indicator lights up. When the water
is full, please remove the rubber blockage from the drainage hole at the bottom of unit, and drain all
water outside.
When the water tank is full, the water indicator light will light up. After 5 minutes, “E2” or “E4” code will
be displayed on the display screen, and the compressor will automatically stop running. At that time,
the plug at the drainage outlet can be removed and the water can be drained through the drainage
pipe.
After drainage “E2/E4” code will automatically disappear and the machine will return to normal
operation.