WAMGROUP TOREX ILV, Руководство по сборке

Страница: 12 / 40

2.0 INFORMATION REGARDING SAFETY
ILV
2
TOR.056.--.M.EN Issue: A1
09.16
8
2.4 Safety prescriptions for maintenance and replacement of components
Danger - Warning
Before carrying out any operation on the device concerned, ensure it is switched off and disconnected
from all mains and use suitable devices to prevent the possibility of the power sources being activated
accidentally.
Maintain the device concerned in the conditions of utmost efficiency compliant with the maintenance
plan provided by the Manufacturer.
Good maintenance apart from preserving the functional features and essential safety features over
time, will also allow extending the working life of the device concerned and achieving the best possible
performance.
Strictly follow the procedures indicated in the Manual, especially those concerning safety.
Ensure that all the safety devices are active and working properly.
Mark off the work area in such a manner as to prevent the access of unauthorized persons.
Replace the worn and damaged components exclusively with original spare parts, whose safety, reli
-
ability and interchangeability have been undoubtedly established.
Apart from invalidation of the warranty, the Manufacturer declines all responsibility for damage to
objects and harm to persons deriving from the use of non-original spare parts or due to modifications
made during repairs without express written authorization.
Do not dump polluting material (oil, grease, paint, plastic etc.) in the environment, but carry out waste
separation disposal depending on the chemical composition of the various products in compliance
with the legislation in force.
On completion of maintenance or replacement operations, before resuming production, check that no
foreign bodies (rags, tools etc.) have been left inside the device concerned.
2.3 Safety prescriptions for use and operation
Do not tamper with the device concerned by using any kind of device to obtain performances different
from those designed.
Each unauthorized modification can endanger the health of persons and damage the machine itself.
The operators must wear only protective clothing and personal protection devices suitable to the op
-
erations to be carried out required by the safety and work accidents prevention standards.
Before operation make sure all safety devices are installed and working properly.
During operations, prevent access to the work area by unauthorized persons.
Remove all obstacles or sources of danger from the work area.