background image

WamBam Nantucket Vinyl Picket Fence w/Post

and No-Dig Steel Pipe Anchor Kit (4’H x 6’ W)     

PRODUCT OVERVIEW

This fence can easily be trimmed down in width to accomodate shorter applications.

1 5/8” Galvanized Steel Pipe

Please visit 

www.wambamfence.com

 or call us at 

1-877-778-5733

 for answers to your other questions.

We are eager to help you succeed in your project.  Thanks for choosing WamBam and all the best with your project. 

TIPS

1

.  Careful planning & measuring of your fence is essential.  Moving pipes once driven into ground is extremely difficult.

2

.  After you install your first panel and you have gone thru the learning curve, you can opt to temporarily remove your

      fence panel and posts and continue driving all your pipe.  This will enable you to work with an unobstructed string line.

3

.  When cutting PVC use a fine-toothed metal or wood blade.

4

.  For easier spacing of pipe anchors, you can optionally use a piece of 1x4 wood lumber cut at 70 3/8” for step 2.

Use a wood spacing guide (

not included)

 cut to 70 3/8” to

help identify the location of your next pipe anchor.

5

.  Once your corner and end posts are set you can use your string line to adjust your top donuts into alignment for a

     straight fence line 

(Figure A)

.  Then use a level to plumb the remaining bottom donuts to ensure each post is straight

     and level to the connecting fence panel 

(Figure B)

.

End Post

Adjust donuts to the string line.

Corner Post

Line Posts

Figure B

(View From Front)

Ground

Figure A

(View From Top)

6

.  Most yards are relatively level and will allow for a fairly simple installation.

      If your yard is steeply pictched or is very uneven you may need to stair step your panels as illustrated below.
      Post heights can be trimmed down as necessary.

Ground

Please note the height of post in regards to the top of the panel versus a level application.

The bottom of the posts would also sit approximately flush to the top of the ground versus 

being buried into the ground 1”to 3”.

2

V-3.1

Pipe Anchor Detail

26 in.

String Line

Adjust bottom

donut into level.

.090 in. Wall Thickness

Ground

3.5 in

1.5 in

72 in

68 in

3 to 4 in

2 in

3.5 in

33 in

3.5 in

48 in

1 in

3.46 in

1.5 in

26 in

32.5 in

3.5 in.

1.5 in.

4” x 4” Post

WamBam Nantucket Vinyl Picket Fence w/Post

and No-Dig Steel Pipe Anchor Kit (4’H x 6’ W)     

BOX CONTENTS

Each Fence Panel Box Includes:

•  Post Cap 

(1)

•  4”x4” Vinyl Post 

(1)

•  Top Rail 

(1)

•  Pickets 

(13)

•  Bottom Rail 

(1)

 

•  Brackets 

(4)

•  #10 x 1in. Stainless Steel Screws 

(24) For Brackets

•  Steel Pipe Anchor w/Gears and Donuts 

(1)

Sold Separately:

•  4”x4” Finishing Post w/Cap and No-Dig Steel Pipe Anchor Kit

4”x4” Finishing Post w/Cap and No-Dig Steel Pipe Anchor Kit 

Sold Separately 

(see note on left)

       WARNING!

If your yard has a severe 
slope or elevation change 
greater than approximately 
7” to 8“ over one panel of
fence, you will not be able 
to install this fence.  Your 
post will not be long 
enough to accommodate.

Ground

CONFORMS TO

BOCA POOL CODE

1

4

Отзывы: