Walther VMS-13-EH-0.5, Руководство по сборке

Страница: 16 / 20

Rev. 1.2
Assembly Instructions
– Dosing Pen VMS-13-EH
Page 16 of 20
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
– info@walther-2000.de
10.2.1 Spare Part List for VMS-13
Dwg No. Art.-No. Qty Description
1 * 1
Nozzle (in the drawing: adapter nozzle

1.0 mm)
2 97640726 1 Gasket ring, Alu, ø10.8 x 6.5 x 1mm
3 97511406 1 Main body VMS-13, ø24 x 100mm, anodized
4 97910471 1 Hanging clamp, VMS-13 (optionally available)
5 97640004 1 Variseal 2.65 x 2.0 x 2.8
6 97640021 1 O-Ring 6.07 x 1.78 / Viton®
7 97810013 1 Sealing screw, diam. 11 x 21mm
8 97640026 1 O-Ring 2.90 x 1.78 / Viton®
9.1 97112293 1 Nozzle needle, KV, 0.2
– 1.5mm, 2 x 96.5mm
9.2 97710008 1 Piston, diam. 11.8 x 20.5mm
9.3 97610017 1 Threaded pin DIN 913 M3 x3
10 97640001 1 O-Ring 7.65 x 1.78 / Viton®
11 97820024 1 Pressure spring 1.2 x 21.5mm
12 97610567 1 Needle lock, normal, ø13.8 x 14mm, nickel-plated
13 97610558 1 Threaded pin DIN 913 M4 x25
14 97410006 1 Nut DIN 439 BM4
15 97221021 1 Plug-in nipple, brass, M5 - 4/3
* Article numbers can be found on the following pages.
IMPORTANT
Always indicate the inscribed serial numbers when ordering spare parts !