Operating instruction and technical description
BA EV tester type 2 - 2.0
©
Walther-Werke Ferdinand Walther GmbH
page 3 of 10
1 Operating instructions EV simulator
These operating instructions for the EV tester / EV simulator shall be a valuable help for the operation and
troubleshooting of charging stations for electric vehicles.
This version of the document was last updated in February 2012, version 2.0
The manual is continuously adapted to the technical enhancement of the devices.
We would appreciate your requests and suggestions or ideas for improvement.
Walther-Werke
Ferdinand Walther GmbH
Postfach 1180
D-67298 Eisenberg
Phone.:
06351 / 475-0
Fax:
06351 / 475-227
E-Mail:
Internet: www.walther-werke.de
2 Safety notes
Besides the technical protective measures, the following precautionary measures also help minimizing the
risk of accidents. Compliance with these recommendations helps minimizing the risk of health damages,
injuries, property damages and production downtimes.
Please see that these precautionary measures will be observed - it's in your own interest.
Train and instruct the operating personnel thoroughly!
The plant must only be operated and opened by trained technical staff.
Store these instructions in a way that they are clearly visible and within reach of the
operating personnel.
Acquaint all operators with the safety precautions.
Ensure regular and professional care and maintenance.
Orderly workplace = safety.
Do not remove or deactivate any safeguards. Damages safeguards either have to be
repaired professionally or have to be replaced.
Protection against electric shock!
Prior to any installation on electrical parts always switch off the supply or the main
switch and withdraw the mains plug.
Do not touch live parts.
Use insulated tools.
Never touch electric cables with wet hands.
The plant must not be permanently exposed to rain or humidity.
