Rev. 1.1
Assembly Instructions - Spray Valve SMS-13
Page 7 of 26
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
4.3 Type Label
The type label was etched into the casing near the material
connection. The serial number is also hammered into this la-
bel.
5 Installation and Start-up
The valve can be installed in any position. A special bracket is also available for a fixed installation (option;
see drawing). The distance to the application area depends upon the desired application width.
During intermittent operations, the device will produce own vibrations. Therefore make sure that the device is
firmly installed. Make sure you avoid extremely high vibrations (can be transferred from device to valve).
5.1 Hose Mounting
Three functional hoses will be mounted as follows:
•
Control air (black)
Connection (13): to 3/2-way magnetic valve
•
Control air (black)
Connection (13): to 3/2-way magnetic valve
•
Sprayed medium (transparent or white)
Connection (14): to pump