Operating Instruction
English
Type 95400
Product Description
8
5
Product Description
5.1
Intended Use
- The airgun is intended for air-cleaning of objects and places difficult to access
as well as blow drying of damp places.
5.2
Technical Description
material:
plastics
- to avoid any negative influence on the material property (plastic) of the housing of the
airgun, the airgun must not be cleaned with benzene or alcoholic cleaning agents.
Similarly, when heavily oily it should be cleaned with water only.
- Should damage occur on the plastic housing despite the observation of these notes
the airgun must not be used further. Bursting or yielding of the thread on the nozzle
connection is possible.
5.3
Technical Data
The airgun can be equipped with various connections.
These connections can be inquired at the manufacturer Walther-Präzision.
The nozzles are designed in such way to provide a wide protection against improper use so
that any excessive buildup of pressure is avoided when placed on skin.
Nevertheless the blowing force is underestimated.
Pressure is often unnecessarily increased for subjective reasons, this is not necessary.
Working pressure:
5-6- bar
Max. working pressure: 8 bar
Operating temperature: -10°C bis +50°C
Noise level:
(measured in ca. 1m distance to the air
blower)
see table
- the airgun is not intended for any other
usage and technical values than
indicated in the product description.
- If the airgun is used not according to the intended use and the respective technical values
no safe operation can be ensured.
- Regarding any and all personal injuries and damage to property resulting from any and all
use not according to the intended use or to the technical values not the manufacturer but the
operator of the airgun is responsible and liable
Inlet pressure
Noise level
1 bar
70 dB/A
2 bar
72 dB/A
3 bar
74 dB/A
4 bar
76 dB/A
5 bar
78 dB/A
6 bar
80 dB/A
