WALTHER PILOT wa800 series, Руководство по эксплуатации

Страница: 14 / 25

27 26
Contents
Exploded Drawing 2
Declaration of CE-Conformity 27
List of Replacement parts 28
1 General 34
1.1 Identification of Model Version 34
1.2 Normal Use 34
1.3 Improper Use 35
2 Technical Description 36
3 Safety Warnings 36
3.1 Safety Warting Symbols 36
3.2 Generally Applicable Safety Precautions 37
4 Assembly / Installation 38
4.1 Mounting of Spray Gun 38
4.2 Connection of Input Lines 38
5 Operational Handling 38
5.1 Safety Warnings 38
5.2 Starting/Stopping Requirements 39
5.3 Spray Pattern Test 39
5.4 Spray Pattern Adjustments 40
5.5 Retooling of Spray Gun 41
6 Cleaning 42
6.1 Safety Warnings 42
6.2 Cleaning - Complete 42
6.3 Cleaning - Routine 43
7 Repairs / Replacements 44
7.1 Replacement of defective Needle Seal Packings 44
7.2 Replacement of Nozzles, Needles, Springs and Seals 44
8 Trouble shooting and Corrective Action 45
9 Disposal of Cleaning / Servicing Substances 45
10 Specification Data 46
Declaration of EC/EU-Conformity
We, the manufacturers of the equipment, hereby declare under our sole responsibility that the product(s) descri-
bed below conform to the essential safety requirements. This declaration will be rendered invalid if any changes
are made to the equipment without prior consultation with us.
Manufacturer WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation
Automatic Spray Gun PILOT WA 800-Models
WA 800 (Standard version with internal control) V 20 800
WA 805 (Sttandard version without internal control) V 20 805
WA 810-U (circulation version with internal control) V 20 810
WA 815-U (circulation version without internal c.) V 20 815
WA 820-HVLP (Low pressure vers. with internal control) V 20 820
WA 825-HVLP (Low pressure vers.without internal control) V 20 825
WA 830-HVLP-U (Low pres.-circulation vers. with internal c.) V 20 830
WA 835-HVLP-U (Low pres.-circulation vers. without intern c.) V 20 835
WA 840-MP (Mediem pressure with internal control) V 20 840
WA 845-MP (Medium pressure without internal control) V 20 845
WA 850-MP-U (Medium pres.-circulation with internal c.) V 20 850
WA 855-MP-U (Medium pres.-circulation without internal c.) V 20 855
WA 870-K (pressure-adhesive version) V 20 870
WA 871-K-U (pressure-adhesive version-circulation) V 20 871
WA 872-HVLP-K (Low pressure-adhesive version) V 20 872
WA 873-HVLP-K-U (Low pressure-adhesive version-circulation) V 20 873
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006/42/EC
2014/34/EU (ATEX Directives)
DIN EN ISO 12100
DIN EN 1953 DIN EN 13463-1
DIN EN 1127-1 DIN EN 13463-5
Specification according 2014/34/EU
Category 2 Part marking
II 2 G c T 5
Tech.File,Ref.:
2407
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is prohibited until such time
as the end product has been proved to conform to the provision of the Directives 2006/42/EC.
Wuppertal, the 12th of September 2017
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety instructions
provided in the product documentation must be observed at all times.
p.p.