Walter ULTI-MATE 30-A 285, Инструкция по эксплуатации

Страница: 4 / 17

ULTI-MATE MANUAL 4
• Shift the guard until it reaches the desired position.
• Unleash the button again.
Mounting the accessories
• Turn the side of the lower flange with the correct collar diameter to face
upwards.
• The collar diameter depends on the axis diameter of the accessory.
• Place the accessory disc on the lower flange.
• Lock the drive shaft with a No. 6 Allen key.
• Fit the flange nut.
• Secure the flange nut with the pin wrench and No. 6 Allen key.
Consult a WALTER applications expert to determine the correct type of finishing disc for each application.
Using the Ulti-Mate
Optimal speed for the accessories
Rpm setting
Setting RPM
1 2 500
2 3 940
3 5 315
4 6 690
5 8 125
6 9 500
As a rule never exceed the maximum speed indicated by the manufacturer!
WALTER’s recommendations
Type of the accessory RPM Position
Enduro-Flex 2in1
6 690 4
Blendex U Turbo
6 690 4
Blendex U
6 690 4
FX Stainless
3 940 2
Felt wheel 2 500
1