Walter ULTI-MATE 30-A 285, Инструкция по эксплуатации

Страница: 3 / 17

ULTI-MATE MANUAL 3
Product Specifications
Accessories
• Pin wrench
• Allen keys: 6mm
• Protective cover
• Handle
Warranty
If the machine is used according to instructions WALTER offers a 12-month warranty. Parts affected by normal
wear and tear fall outside the scope of this warranty. If the user modifies the device during the warranty period,
WALTER is released from all warranty obligations.
Safety instructions
Always observe the following safety instructions for the use and maintenance of the Ulti-Mate:
• Never use the machine without the accessory guard.
• Do not leave any equipment keys on top of the machine.
• Always use both hands for support.
• Do not overload the equipment.
• Wear suitable clothing.
• Wear safety goggles, dust mask and ear protectors.
• Hold the work piece securely in place with clamps or a bench vice, if necessary. This leaves both hands free
for working.
• Avoid abnormal or unsteady posture.
• Do not use any electric tools, machinery or equipment in a wet or damp environment. Never leave electric
appliances out in the rain.
• Do not allow the machine to hang or swing from its cable. Do not attempt to unplug the machine from the power
socket by pulling on the cable. Protect the cable against heat, oil and sharp objects.
• Check if the switch has been turned off when connecting to the lighting network.
Mounting the Ulti-Mate
Mounting the guard
Mounting
• Push the button on the back of the arm and keep it pushed in.
• Slide with the other hand the guard cover from bottom to top into the slot.
• First slide the guide with the biggest diameter about 5mm in the outer
slot. Next follows the guide with the smallest diameter, which slides into
the inner slot.
•
ATTENTION: Never attempt to slide both guides at the same time in the
slots, this will not work. Always start with the outer slide, the inner slide
will follow automatically.
• Put the protective cover in the desired position.
• Unleash the button to secure the position.
Relocating the guard
• Push the button on the back of the arm and keep it pushed in.