Walter AXIO, Инструкция по монтажу

Страница: 23 / 27

Important advices
- Please make sure that the slats do not rub onto the skimmer straps
- We do not recommend you nor the use of the salt elektroliser, neither another electro physical device, due to the oxydation risks for submerged metals.
- We highly advise you to install an independant ground connection.
- The polycarbonate slats must stay in contact with the water surface to avoid a definitive deformation.
- The first strip equipped with quick fastening system must be fitted to the axis (fixing screw on the axis) spread equally the lateral play from the cover
- Never cut the endcaps, otherwise the rigidity and tightness would not be guaranteed anymore.
- When the cover is not in use for an extended period of time, the electrical breaker panel must be turned off.
- Fastening system are fitted with stainless hex head cap screws, as well as sealing gaskets in order to lock the straps, please click both parts together.
Walter remains at user's disposal for any further advice or information.
Cover installation
When installing this cover, the presence of 2 people is required, and one of them should be entitled to install it in compliance with Norm NF C15-100
Cover components
>
toolbox, hammer drill, grinder, an electric screwdriver, an electrical measurement device.
>
We advise you to wear handgloves for the manipulation of sharp components, as well as protection goggles and safety shoes.
Pool use
Only one adult is allowed to operate the cover. When opening and closing the pool, he must ensure that no bather is left in the pool , and remove all
floating objects such (buoys, inflatable mattresses, boats or balloons) from the pool.
While closing the pool, the access must be locked with the fastening system.
For safety reasons, when closing/opening the pool, please remove the key from the keybox.
Before opening the pool, do not forget to unlock the fastening system.
to prevent the automatic cover from being stuck, the switch should not be left in intermediate position.
Before use, the water level must be checked. it should not be too high, as this would prevent the cover from working properly.
Please never empty your pool without your installater. If you own polycarbonates slats, these should always be immersed to avoid a final distortion. By
sunny weather and especially when the sun shines on the slats (when the pool cover is closed) and if water temperature is higher than 30° It is also
required to leave the cover rolled all night, to prevent slats damages.
18